12V 150W (160W) Panneau solaire + 10A Contrôleur charge solaire + MC4 Connecteurs #30200161

12V 150W (160W) Panneau solaire + 10A Contrôleur charge solaire + MC4 Connecteurs #30200161
  • 12V 150W (160W) Panneau solaire + 10A Contrôleur charge solaire + MC4 Connecteurs #30200161
  • 12V 150W (160W) Panneau solaire + 10A Contrôleur charge solaire + MC4 Connecteurs #30200161

12V 150W (160W) Panneau solaire + 10A Contrôleur charge solaire + MC4 Connecteurs #30200161

KIT SOLAIRE avec panneau photovoltaïque monocristallin 160W, MC4 Connecteurs et PWM 10A Contrôleur charge solaire pour toutes les applications telles que camping-cars, bateaux, cabines etc.
Prix:
125,90 €
Prix catalogue:
179,85 €
Économisez:
53,96 € (30%)
Actuellement non disponible

Description

Le kit contient:
- 1 160W Panneau solaire monocristallins- 1480 x 670 x 35 mm (# 30050175);
- 1 PWM Contrôleur charge solaire 10A 12V - 13,3x7,1 cm (# 30550701);
- 1 MC4 Cabur Connecteur mâle (# 30750303);
- 1 MC4 Cabur Connecteur femelle (# 30750304).

160W 12V Panneau solaire monocristallins 
Caractéristiques:
- Modèle:
SS160-36M;
- Efficacité de Module: 16 % ;
- Efficacité des cellules: 17,5  % ;
- Puissance de crête:  160W;
- Vm (la tension à p. maximum): 18.5V;
- Im (courant maximum):  8.65A;
- Tension de circuit ouvert (Voc): 22.5V;
- Courant de court-circuit (Isc): 9.14A;
- Tolérance de puissance:  +-3%;
- Dimensions: 1480 x 670 x 35 mm;
- Poids: 12 Kg;
- Tension maximale du système: 1000VDC.

PWM Contrôleur de charge solaire pour systèmes photovoltaïques 12V
Caractéristiques:
- Configurations de tension: 12V
- Courant de charge nominale: 10A
- Sortie: 1
- Température de travail: -35/ 55°C
- Protection: IP30
- Type: autonome, voile/camping
- Dimensions: 13,3x7,1 cm
- Poids: 0,119 Kg
- Affichage LCD: NO.

MC4 Cabur connecteurs mâle et femelle
Données techniques:
- PIN dimension: D.4mm ;
- Tension maximale: 1000 V CC ;
- Courant maximum: 30A à 70°C - 25A à 85°C ;
- Résistance de contact :  <5m Ohm
- Degré de protection: IP67 (CEI 60529) ;
- Plage de température: -40°C à 90°C ;
- Niveau d'inflammabilité: UL94-VO.


Solar KIT composed of 160W monocrystalline photovoltaic panel, MC4 connectors and PWM 10A solar charge controller for all applications such as boats, camper vans, cabins, shelters and 12V systems.
The kit contains:
- 1 160W Monocrystalline Photovoltaic Module - 1480 x 670 x 35 mm (# 30050175);
- 1 Solar Charge Controller PWM 10A 12V - 13,3x7,1 cm (# 30550701);
- 1 MC4 Cabur male connector (# 30750303);
- 1 MC4 Cabur female connector (# 30750304).

Photovoltaic Monocrystalline module 160W 12V.
Designed for rural lighting solutions, data collection and special applications. Thanks to its versatility, the panel is very popular and used both in developing countries as well as the European market. This panel was designed to work under the most difficult climatic and working conditions. The design of the anodized aluminium frame makes the panel safe, simple and quick to install in many applications. Every single cell and panel produced undergoes a series of tests and quality controls during every phase of production. The interconnections between panels are easy, practical and optimized for every configuration and voltage.
Features:
- Type: SS160-36M;
- Module efficiency: 16%;
- Cell efficiency: 17.5%;
- Peak power: 160W;
- Vm (voltage at maximum p.): 18.5V;
- Im (maximum current): 8.65A;
- Voc (open circuit voltage): 22.5V;
- Isc (short circuit current): 9.14A;
- Power tolerance: +-3%;
- Dimensions: 1480 x 670 x 35 mm;
- Weight: approx 12 Kg;

PWM Solar Charge Controller for 12V PV systems. Suitable to charge GEL, AGM or acid batteries via traditional 36 cell photovoltaic panels. Charges batteries in boats, RVs, cabins and lodges, alarm systems.

With battery status LED indicator.
Features:
- Voltage configurations: 12V;
- Rated charging current: 10A;
- Output: 1;
- Working temperature: -35/+55°C;
- Protection: IP30;
- Type: Stand Alone, Boat/Camper;
- Dimensions: 13,3x7,1 cm;
- Weight: 0,119 Kg;
- LCD display: NO.

MC4 Cabur male and female connectors designed specifically for rapid and reliable connections in photovoltaic applications with the most common inverter and junction box. Contacts are made with tinned copper and casing in PPO.

LINE 4, with metal contacts D.4 mm.

Technical data:
- PIN dimension: D.4mm;
- Maximum voltage: 1000 VDC;
- Maximum current: 30A at 70°C - 25A at 85°C;
- Contact resistance: <5m Ohm
Materials:
- Contact material: Cu;
- Plating: Tin;
- Insulation: PPO.
Environmental conditions:
- Protection grade: IP67 (IEC 60529);
- Temperature range: -40°C +90°C;
- Flammability level: UL94-VO.