RUST CONVERTER. Pack of 0,75lt.
RUGISTOP is an emulsion-based product which transforms rust into metal-organic compounds which adhere perfectly to the surface.
RUGISTOP enables rust to be stopped on surfaces which are not easy to clean, doing away with the need for tiring sanding and buffing.
The product is suitable for treating ferrous surfaces such as railings, radiators, car bodies, etc.. The product is easy to apply and does not ruin painted parts.
INSTRUCTIONS FOR USE
The product can be applied on ferrous surfaces in general.
-Specific gravity per UNI EN ISO 2811-1: 1.03 ± 0.02 kg/l
- Outflow rate UNI 8356: 12-13"Ford cup n 4 at 25 C
-Appearance: milky liquid
-Drying (at 25 C and 65% R.H.): touch dry after 2 hours;
coatability after 24 hours and no more than 4 weeks after
PREPARING THE SURFACE
- Remove any compact and adherent calamine.
- Remove any grease from the surfaces using nitro thinner.
- Apply the RUGISTOP rust converter.
Air and surface conditions:
Air temperature: Min. +5 C / Max.+35 C.
Relative humidity of the air: <80%.
Temperature of the surface: Min. +5 C / Max. +35 C.
- Stir the product before use.
- The product can be applied with a brush, or applied by
means of roller coating or spraying.
- Thinning: ready to be used.
- N coats: a single coat should be applied.
-Tools should be cleaned immediately after use using
- Indicative spreading rate: 8-10 sq m/l on smooth surfaces.
It is advisable to perform a preliminary test on the specific
surface in order to determine the actual consumption.
Maximum temperature for storage stability: +30 °C
Minimum temperature for storage stability: +5 °C
The product should be preferably used within 2 years from
date of manufacture when stored in original unopened
containers and in appropriate temperature conditions.
Dir. 2004/42/EC not applicable
The product does not require labelling in accordance with 67/548/EEC and 1999/45/EC and its subsequent changes and updates. Use the product in accordance with the hygiene and safety regulations in force; avoid litter with the containers, allow the remains to dry well and treat as special waste. Keep out of the reach of children. Use in an airy place.
For further information consult the safety data sheet.
Application, on ferrous surfaces affected by rust, of
RUGISTOP Rust converter cod. 5900100, for converting rust on areas which are hard to clean.
COLORIFICIO SAN MARCO guarantees that the information herein
is provided to the best of its technical and scientific knowledge and
based on its experience; nonetheless, the company may not be held
liable for the results obtained using these products, as application
conditions are beyond its control. It is recommended to always make
sure that the product is suited to each specific instance. The present
sheet voids and replaces any previously existing sheets. For further
technical information call the technical service +39 041 4569322.
1 / 1 RUGISTOP - v.2016-03-15
Colorificio San Marco Spa - Via Alta 10 - 30020 Marcon (VE) - Tel +39 041 4569322 - www.san-marco.com - email@example.com - firstname.lastname@example.org