Hempel Light Primer A+B 0,75 Lt Grey #456COL030

Hempel Light Primer A+B 0,75 Lt Grey #456COL030

Hempel Light Primer A+B 0,75 Lt Grey #456COL030

Two-component epoxy primer thick. It forms a hard, tough and resistant to water and petroleum products. Recommended as a primer above and below the waterline.
Price:
€26.43
Listing:
€35.23
You Save:
€8.81 (25%)

Description

MORE INFORMATION

Hempel Light Primer A+B. Packing of 0,75 Lt. Colour Grey.

LIGHT PRIMER

Two-component epoxy primer thick. It forms a hard, tough and resistant to water and petroleum products. Recommended as a primer above and below the waterline for aluminum boats, fiberglass, plywood, steel and ferro-cement. also suitable for the prevention and repair of osmotic blistering in fiberglass boats and for the protection of the hulls and rudders.

DESCRIPTION:

HEMPEL'S LIGHT PRIMER 45551 is a two-component polyamide epoxy primer thick. It forms a hard, tough and resistant to water and petroleum products.

RECOMMENDED USE:

As a primer above and below the waterline for aluminum boats, fiberglass, plywood, steel and ferro-cement. also suitable for the prevention and repair of osmotic blistering in fiberglass boats and for the protection of the hulls and rudders.

PHYSICAL CONSTANTS:

Base
Colour / Reference: White / 11630
Finish: Matte
Volume solids,%: 52 ± 1
Theoretical coverage: 5.2 m² / liter at 100 microns
Flash point: 25 ° C
Specific weight: 1.3 kg / liter
Touch dry: 3-4 hours at 20 ° C
Full curing: 7 days at 20 ° C
V.O.C .: 445 g / liter
Catalyst
Colour / Reference: Grey / 12170
Finish: Matte
Volume solids,%: 51 ± 1
Theoretical coverage: 5.1 m² / liter at 100 microns
Flash point: 25 ° C
Specific weight: 1.3 kg / liter
Touch dry: 3-4 hours at 20 ° C
Full curing: 7 days at 20 ° C
V.O.C .: 450 g / liter
The physical constants stated are obtained from the formulas approved by Hempel. They are subject to normal manufacturing tolerances and where stated, being standard deviation according to ISO 3534-1.

APPLICATION DETAILS:

Mixing ratio: Base 45559: Curing agent 95360 2: 1 by volume
Method of application: spray Air Spray HVLP gravity fed conventional suction pressure
Nozzle diameter: 1.6-1.8 mm 1.4-1.8 mm 1.4-1.8 mm 1.4-1.8 mm
Nozzle pressure: 0.7 bar 5 bar 5 bar 5 bar Airless spray Brush
Thinner (max. Vol.): 0845 (5%) 0845 (5%)
Pot life: 2 hours at 20 ° C 6 hours at 20 ° C
Nozzle orifice: .019 "-.023"
Nozzle pressure: 175 bar / 2450 psi (Airless spray data are indicative and subject to adjustment)
Cleaning of tools: HEMPEL'S THINNER 0845 - HEMPEL'S DEGREASER 99611
Suggested thickness, dry: 100 micron
Suggested thickness, wet: 200 microns
Recoat interval: (See APPLICATION INSTRUCTIONS)
Surface preparation, application conditions, and the next and previous hands
See notes its specification.