Quick BTQ 185-105 DC Double counter-rotating propellers bow thruster 12V or 24V 6.3 Kw 231.5 lb
Double propellers made in sturdy composite material. Recommended boat length from 12-15 m (39-50 ft). Solenoids protection carter in sturdy composite material. Gearbox in bronze. Zinc anode independent from the gearbox and hence easily replaceable. Equipped with elastic coupling.
The Gearbox is created so that the behaviour of the propeller is unaffected in either direction. The conical gears that make up the gearbox are reinforced and adjusted to ensure maximum efficiency. Maintenance is not required since the special highly resistant components guarantee a perfect lubrication seal for life. The anodic zinc protection is easily replaceable.
The bronze propeller gearleg is provided with a hydrodynamic profile that minimizes turbulence.
The Propellers guarantee maximum thrust performance and reduction in current absorption. This is made of composite materials, resistant in every condition, and fastened with self-locking nuts in stainless steel.
The case that protects the reversing contactors is made of robust composite materials that are resistant to corrosion. The electrical connections are provided with quick connectors.
The elastic joint that optimizes the alignment between motor and gearbox is an exclusive Quick design. This acts as an even tension device, preserving the operating system from impulses from the bow thruster, with above-average results.
The motors new-generation materials have been chosen to constantly guarantee required output and maximum performance, given the severe conditions required by the application. Protection against overheating of the motor is ensured by a microprocessor.
The support flange is completely in hard-cote anodized aluminium.
Model: BTQ 185-105;
Propulsion system: Double counter-rotating propellers;
Ø Tunnel: 185 mm (7” 9/32 in);
Voltage: 12 V or 24V;
Motor power: 6.3 Kw;
Thrust: 105 kgf (231.5 lb);
Boat size*: 12-15 m (39-50 ft);
Weight: 12V - 28 kg (61.7 lb), 24V - 25.2 kg (55.5 lb);
Dimensions: 12V - A 410 mm (16” 9/64 in) - B 185 mm (7” 9/32 in) - C 265 mm (10” 7/16 in), 24V - A 374 mm (14” 23/32 in) - B 185 mm (7” 9/32 in) - C 265 mm (10” 7/16 in).
*Attention: the indication may vary according to the boat type.
Note: Click on the pop-up menu to select thruster 12V or 24V.