What is 4bready?
4bready is a revolutionary and innovative system with two different methodologies prevents the growth of algae, barnacles, mussels and other micro-organisms.
The first ultrasound system generates an oscillation phenomenon that by transmitting on the surface of the hull prevents the formation of all forms of life.
The fully patented 4breadyR device has been developed using the principle of ultrasonic wave to inhibit the growth of marine organisms such as cirripeds, mussels and barnacles. The device utilizes a microprocessor control unit in combination with non through-hull ultrasonic transducers secured to the inside of the hull. The number of transducers required varies according to the size of your boat, with each covering about 6 meters diameter. The device is fitted with two transducers and is suitable for boats up to 12 metres long. Major advantages deriving from the use of this device: -Saving on all maintenance cycles of the boat -Fuel saving deriving from the hull cleaning -Total elimination of chemicals which could be harmful to the marine environment.
Lowers the cost of the dock
The costs of the dock will be much lower because you can avoid ground the boat every 4-5 months or every year as it does, statistics in hand, the seventy-eight percent of the owners of the boat under sail or motor.
For fans and professionals of the sea is essential to have always clean hull to get ideal performance, then the best solution is 4Bready
To give a practical example, the average dock a boat of 33 feet from the coast to one thousand eight hundred thousand euro, so the cost of purchasing 4B Ready pays for itself in a few months.
The boat is always ready
A hull clean and free of microorganisms, of barnacles and other shellfish, will allow you to maintain maximum speed and enjoy the best performance of your boat.
Moreover, all seacocks, the propellers and bow thrusters, the flaps, speed sensor and sounder and other basic elements of your boat will be always clean and allow you to set sail when you wish without problems and assured of excellent performance.
Without 4BReady, in the winter months, when the boat is used less and remains in the water for long periods without surfing, you realize that performance degrades and it would be appropriate to put on the ground the boat for another cleaning.
4BReady obviously helps a lot to keep your boat clean and does not allow nesting of life. In any case, the possibility exists that a little 'alghette, as seen in the video of the first page, and a few small micro organism can take root, but even if it occurred in 50% 4BReady would always be of great use.
The effectiveness of 4BReady also depends on the conditions of the sea, the salinity of the water, by the presence of specific micro-organisms and other components that may vary from sea to sea.
4Bredy helps prevent pollution from antifouling classic that always contain highly dangerous substances and harmful for marine organisms and for the entire habitat. Our staff is constantly working on new circuits for even better performance to try to be up to the dispersal of pollutants that irreparably damage the environment in a way that you always have your own boat.
A hull dirt does consume 20% more fuel. A very important factor for motor boats.
4BReady allows you to save a great amount of fuel, especially in motor-boats, as a hull devoid of barnacles and other marine organisms has a resistance much lower than a hull dirty and the speed and performance of the resulting will be absolutely superior .
Even propellers perform better and develop a power always ideal. In sailboat racing performance will be much higher and will not need to clean the hull in the days immediately preceding the race.
Best performance of the hull
Greater speed and maneuverability thanks to a hull smooth and clean at any time of the year.
How does this work
4 br and ady uses a control unit microprocessor in combination with ultrasonic transducers that are attached to the inside of the hull (no-through fitting). The number of transducers required will vary depending on the size of the vessel, with a cover of operation for the transducer of approximately 5 meters in diameter. When the transducers are activated by the control unit, the vibrations of the transducers create a micro thin layer of micro air bubbles and a fast moving water creating a "cavitation", makes it so difficult for fouling organisms and algae from attaching to the hull and the ultrasonic waves destroy cells of algae and other micro organisms. 4BReady performs its function automatically without any toxic chemical that could be harmful or hazardous to the marine environment.
Maximum consumption: 900ma 12V
Standard cable length: 8 metri
Voltage transducer: da 250V a 850V pico-picco
Power transducer: 40/60W
Sequential frequency: 18 khz-42.8 khz
- Datasheet (212 KB)