Portable charger HB-1206S can be used only with batteries of 6 or 12 V for acid:
-When uploading, if overloaded, the charger flashes the voltage to a normal situation, thanks to its automatic protection system.
-In case of a short circuit, the device will automatically turn off and then turn back on after a couple of minutes.
-Recharge your battery as soon as possible.
-Ability to load batteries in 6 and 12 V.
Built with durable material and with a carry handle, connects to the battery via the terminals blocks.
• Input voltage: 230 V – 50 Hz
• Output voltages and currents:
(for motorcycles: from 1.2 to 14 Ah)
• 7.2 V – 0.8 to
• 14.4 V – 0.8 to
(by car: from 24 to 120 Ah)
• 14.4 V – 3.8 in
• 14.7 V – 3.8 in
(tensions mean ± 0.25 V, ± 10%) currents
• The length of the power supply cable provided is 160 cm.
• The length of the cables for connecting the battery is 150 cm
• Dimensions: 16 x 8 x 17 cm.
This battery charger does not have a power supply function and as such in order to provide voltage and current it needs to be connected to a battery with a minimum voltage of 10.7V.
If the battery voltage is less than 10.7V the battery charger will not activate and will not charge.
a battery with voltage of less than 10.7V could be faulty and a forced recharge could cause the acid to leak, an increase in internal pressure due to the gases and a possible explosion.
• battery charger
• instruction booklet