Hempel Underwater Primer 2,5 Lt #456COL029

Hempel Underwater Primer 2,5 Lt #456COL029

Hempel Underwater Primer 2,5 Lt #456COL029

Painting physical drying, dissolved in mineral spirits and contains aluminum pigments in flake. Recommended use as a primer for antifouling and maintenance as hand sealant between antifouling of different types.
Price:
€53.75
Listing:
€71.68
You Save:
€17.92 (25%)

Description

MORE INFORMATION

UNDERWATER PRIMER 26030

DESCRIPTION:

HEMPEL UNDERWATER PRIMER 26030 is a physically drying paint, dissolved in white spirit and containing aluminum pigments in flake.

RECOMMENDED USE:

As a primer for antifouling and maintenance as sealant between hand antifouling different type.

PHYSICAL CONSTANTS:

Color / Code: Aluminium / 19000
Finish: Matte
Volume solids,%: 37 ± 1
Theoretical coverage: 7.4 m² / liter at 50 microns
Flash point: 35 ° C
Specific weight: 1.1 kg / liter
Touch dry: 2-3 hours at 20 ° C 4-6 hours at 10 ° C
V.O.C .: 495 g / liter
The physical constants stated are obtained from the formulas approved by Hempel. They are subject to normal manufacturing tolerances and where stated, being standard deviation according to ISO 3534-1.

APPLICATION DETAILS:

Application method and Thinner (max. Vol.):
Airless THINNER 0811 (5%)
Air Spray Thinner 0811 (15%)
Brush THINNER 0811 (5%)
Nozzle orifice: .018 "
Nozzle pressure: 150 bar / 2175 psi (Airless spray data are indicative and subject to adjustment)
Cleaning of tools: HEMPEL'S THINNER 0811
Thickness, dry: 50 micron
Thickness, wet: 125 microns
Recoat interval, min: 3 hours at 20 ° C 6 hours at 10 ° C
Intervalloo coating, max: None

SURFACE PREPARATION:

Remove all impurities with HEMPEL'S YACHT CLEANER 67601, followed by a high-pressure cleaning with fresh water. Remove the paint flaking and other residues. Allow the wood to dry, sand the surface to strip and remove all dust.
Touch-up with HEMPEL UNDERWATER PRIMER 26030.

CONDITIONS OF APPLICATION:

The surface must be completely clean and dry. Surface temperature must be above the dew point to avoid condensation. In confined spaces provide a adequate ventilation during application and drying.

PRECEDING COAT:

None or according to specification

NEXT HAND:

According to the specification

NOTES:

If the surface has been exposed to pollutants, before recoating wash the surface thoroughly with a jet of fresh water at high pressure or with a jet of fresh water by rubbing with a stiff brush and allow to dry.

Downloads