Nautiline - Slat 200 inflatable boats

HOME | EXHIBITIONS | DOWNLOAD | DISTRIBUTORS | CONTACTS

	INFLATABLE BOATS

Plywood


	Plywood 230 ----------------------------- Plywwod 270 ---------------------------- Plywood 290 ---------------------------- Plywood 320 ---------------------------- Plywood 360

Slat


	Slat 200 ----------------------------- Slat 230 ----------------------------- Slat 25 0

Air Mat


	Air Mat 230 --------------------------- Air Mat 270 ---------------------------

VTR


	VTR 240 --------------------------- VTR 290 --------------------------- VTR 310

Slat 200

The main property of this tender is the Slatted floor which is economic, easy to roll up and carry up.

Standard equipment
+ Two - two pieces aluminium oars
+ Marine grade plywood bench seat
+ Foot pump
+ Repairing kit
+ Carrying bag
+ Oar lock/oar holder
+ Life line

+ Super D-ring
+ Rubbing strake fender
+ Drain plug set
+ Motor pad inside/outside
+ Tube diameter: 35cm
+ Slatted floor by marine grade plywood

Specifications
Overall length: 206cm
Overall width: 131 cm
Number of chambers: 3
Net weight: 25kg
Max power: 2,5kw/3,5HP
Max load: 250kg
Max persons: 2 (The maximum number of allowed persons refers at boating use; if employed as tender refer to maximum admitted load (kg).

Codice: 35200

Points of marking

- Adhesive structure
- Polyurethane glue
- Cold welding
- Made by hand
- Four layer reinforced seams

All Nautiline inflatable boats use 0,9mm, 1000 Denier polyester fabric which has been specially coated on both sides with PVC.

Abrasion resistance:
The chemical formula of the outside PVC layer makes the material abrasive resistant and airtight properties: 200*170 N/5cm(± 20)

Extreme condition resistance:
Low & High temperature resistance:
-30 + 70°C

Description

Outside PVC layers offers:
Abrasion resistance;
Extreme condition resistance;
Chemical resistance

Inside high polyester fabric offers:
Dimensional stability
Tensile and tear stregth.

Chemical resistance:
Strong resistance to Hydrocarbon, Sunlight, Seawater, Oil and Fuel. Thanks to this properties which protect the material from fading and ageing.

Dimensional stability:
1% (24hrs-70°C)
Tensile and tear strength: 3800*3550 (± 250)


	Copyright 2008 - Nautiline, division of FVG Energy Srl - Via San Giorgio - 33050 Carlino (UD) - Italy - P.I. 02476220302 - Fax +39 0431 68558